• Flat ground
  • Level 2 of 5

How to
No Comply

The short answer

A no comply is a trick where your front foot steps off the heel side and taps the ground while your back foot pops the board up to your leg, then you hop back on. Put the ball of your back foot in the middle of the tail, slightly toward the heel side, and your front foot just behind the front bolts at about 45 degrees, heel hanging off the heel side. Let the front foot slip off and tap the ground as the loaded tail snaps, and push the tail back so the nose comes up.

Not landing your no comply yet?Film one try. Skate AI scores each part of it out of 10 and tells you the one fix for your next try.Get Skate AI on the App Store
Where your feet go
No Comply foot position diagram, regular stance: Ball of the back foot in the middle of the tail, slightly toward the heel side. Front foot just behind the front bolts at about 45°, heel hanging off the heel side. Let the front foot slip off and tap the ground as the loaded tail snaps, push the tail back so the nose comes up, and hop back on.No Comply foot position diagram, goofy stance: Ball of the back foot in the middle of the tail, slightly toward the heel side. Front foot just behind the front bolts at about 45°, heel hanging off the heel side. Let the front foot slip off and tap the ground as the loaded tail snaps, push the tail back so the nose comes up, and hop back on.
Front footBack foot

Ball of the back foot in the middle of the tail, slightly toward the heel side. Front foot just behind the front bolts at about 45°, heel hanging off the heel side. Let the front foot slip off and tap the ground as the loaded tail snaps, push the tail back so the nose comes up, and hop back on.

Step by step

Land your
first No Comply.

Each step is a part of the trick Skate AI scores when you film a try.

  1. 01

    Set up

    Ball of the back foot in the middle of the tail, slightly toward the heel side. Front foot just behind the front bolts at about 45 degrees, heel hanging off the heel side.

  2. 02

    Step off

    Step off and pop in one motion. Let the front foot slip off the heel side and tap the ground as the loaded tail snaps.

  3. 03

    Push

    Push the tail back so the nose comes up.

  4. 04

    Hop

    Hop back on over the front bolts.

  5. 05

    Land

    Land with both feet over the bolts, knees bent, and roll away.

Troubleshooting

Why you're not
landing it.

The board does not come up

Why
You are popping straight down instead of pushing the tail back.
Fix
Push the tail back so the nose comes up.

You step off after the pop

Why
The step and the pop are two moves.
Fix
Step off and pop in one motion.

You miss the board on the way back

Why
You are not hopping back over the front bolts.
Fix
Hop back on over the front bolts.

You roll off the board

Why
Your front foot lands too far from the board.
Fix
Tap the ground right beside the board.

Drill10 no complies slowly, rolling a little, hopping back on over the front bolts each time.

Not sure which one is yours? Film a try with Skate AI and it names the one fix that matters most.

Still not
landing it?

Film your no comply. Skate AI shows you which part went wrong and the one fix for your next try.

QR code that opens Skate AI on the App Store

On a computer? Point your iPhone camera here.

FAQ

No Comply
FAQ

What is a no comply?

A trick where your front foot steps off and taps the ground while your back foot pops the board up to your leg. Then you hop back on.

Do I need an ollie first?

No. A no comply is level 2 of 5 in our guides, and the board comes up from the tail pop, not an ollie.

Which side does my front foot step off?

The heel side.

What comes after a no comply?

The no comply 180, where the back foot scoops the board round while your front foot is on the ground.